Comment éviter la flèche des étagères

Why shelves sag

A loaded shelf bends like a beam. Too much bend and books slide, joints crack and the piece looks broken. The good news: the math is simple and repeatable.

The deflection formula

For a shelf of length L, width b, thickness h, carrying a total load W (N = kg × 9.81):

Distributed load:  deflection = 5·W·L³ / (384·E·I)
Concentrated load: deflection =     W·L³ / (48·E·I)

with I = b·h³/12 (moment of inertia) and E = modulus of elasticity (N/mm²).

Acceptable limits

A 1200 mm shelf at L/240 must bend less than 5 mm.

The cubic-thickness rule

Because I = b·h³/12, doubling the thickness makes a shelf 8× stiffer. Adding 3–6 mm of thickness fixes most sagging shelves without changing anything else.

Rule of thumb

For a moderately loaded solid-wood shelf, maximum span ≈ thickness × 33 (18 mm shelf ≈ 600 mm, 25 mm ≈ 800 mm). Verify with the shelf sag calculator for your real load.

Practical tips

• Support long shelves in the middle to halve the span and cut deflection by ~8×.
• Oak and beech are stiffer than pine or MDF at equal thickness.
• A thin edge strip or apron turns a flat shelf into a stiffer channel.