WoodTools

مخطط فاقد الخشب

بقاياك مشروع مجاني بانتظارك. اذكر قطعك واختر مشروعًا ليخبرك المخطط بالضبط ما يناسب وما ينقص وما ستستخدمه.

قطعة بقايا مقطعة إلى قطع أصغر مع أسهم إعادة تدوير ونسبة استخدام. OFFCUT PIECE 1 ✓ PIECE 2 ✓ PIECE 3 ✓ +1 Usage rate 78% of stock used Missing 2 to buy
Advertisement

مساعد الذكاء الاصطناعي للورشة

صف القطعة التي تريد صناعتها واحصل على خطة كاملة: الأبعاد، قائمة القص، الخامات، التكلفة، الخطوات، الأدوات والوقت.

مساعد الورشة

صف القطعة التي تريد صناعتها واحصل على خطة كاملة: الأبعاد، قائمة القص، الخامات، التكلفة، الخطوات، الأدوات والوقت.

نتائج الذكاء الاصطناعي إرشادية. تحقق من الأبعاد والأحمال والمعايير المحلية قبل البناء.

Advertisement

كيف يعمل

  1. 1

    Add the available offcuts with their length, width, thickness and quantity.

  2. 2

    Define the project parts the same way (use the furniture generator to get them).

  3. 3

    Set the kerf and whether parts may rotate.

  4. 4

    Calculate: see matched parts, missing parts, usage rate and remaining stock.

المعادلة

For each required part, select the smallest stock piece that fits (length ≥ part length and width ≥ part width, or rotated). Usage rate = area of used pieces / area of all available pieces × 100. Missing parts are listed with their dimensions.

نصائح عملية

  • Keep offcuts longer than 300 mm — they are the ones that get reused.

  • Store offcuts by thickness: the thickness decides what you can build.

  • Use the waste planner before buying new wood for any small project.

  • Reserve large pieces for parts that must be one piece (table tops, sides).

أخطاء شائعة

  • Forgetting that offcuts are rarely perfectly straight and square.

  • Assuming the kerf is zero when matching sizes.

  • Using pieces with cracks, knots or rot near edges.

  • Building a load-bearing part from a short join of two offcuts.

Advertisement

تنبيه

هذه النتائج إرشادية فقط. تحقق دائمًا من المعايير المحلية والخطط المهنية قبل البناء.

أدوات ذات صلة

دلائل ذات صلة

مشاريع ذات صلة

الأسئلة الشائعة

Can I really build furniture from offcuts?
Yes. Boxes, shelves, planters, small tables and workshop jigs are classic offcut projects. Match thickness first, then dimensions.
What counts as a usable offcut?
Generally any piece larger than 150 × 100 mm with clean edges. Length matters more than width for most projects.
How is the usage rate calculated?
It compares the area of the offcuts actually used by the project to the total area of your available stock. A high rate means little new wood needed.
All tools